The first batch of 2021 group standard review meetings was held.

The Standards Committee of the Zhongguancun Integrated Circuit Materials Alliance on 2021 December of the year From the 28th to the 29th of the month Hold a meeting 2021 Annual Meeting of the National Standards Committee” and 2021 Online Review of the First Batch of Group Standards for the Year Yes.

This meeting is being held under the new normal of the pandemic situation. The review held online for the first time Yes. Under review Epoxy Molding Compound for Integrated Circuits, and 5 others Item The standards pertain to three specialized fields: electronic gases, packaging, and target materials. The conference is hosted by Chairperson Liu Bing presided over the meeting. Representatives from the drafting group, members of the standards committee, and product user representatives—altogether— 40 Others attended this meeting.

After listening to the standard drafting group’s explanation on the development status of the standard and reviewing the relevant materials, the attending committee members and user representatives conducted a line-by-line review of the draft standard for submission and put forward specific comments and suggestions for revision. In accordance with the Alliance’s Group Standard Management Procedures, the committee members of each specialized group proceeded to vote on the standard. The voting results are as follows:

Standard Name	Agree or Agree after modification	Abstain	Disagree
Epoxy molding compound for integrated circuits	4	0	1
High-purity aluminum and alloy sputtering targets for integrated circuits	6	2	0
Mixed gases for integrated circuits 1.25% Krypton / Neon	11	1	0
Mixed gases for integrated circuits 3.5% Argon /10 ppm Xenon / Neon	11	1	0
Mixed gases for integrated circuits 30% Oxygen / Helium	11	1	0
Gases for integrated circuits Deuterium	11	1	0

Each standard vote must obtain no fewer votes than the number of reviewers. 3/4 The “agree” vote or the “agree upon completion of revisions” vote was approved after review. According to the Assembly’s opinion, “Mixed Gases for Integrated Circuits” 1.25% Krypton / Neon, Mixed Gases for Integrated Circuits 3.5% Argon /10 ppm Xenon / Neon, Mixed Gases for Integrated Circuits 30% Oxygen / Helium, Gases for Integrated Circuits Deuterium 4 After the items of the standard have been revised according to the review comments and confirmed at an expert meeting, they will then be submitted for approval. As for the remaining standards, once they have been revised in accordance with the review comments, draft versions of the standards should be prepared as soon as possible and submitted for approval.

Key words: